Replacement filter for Ecosoft CROSS RAY

Maintain the optimal performance of your Ecosoft Cross Ray reverse osmosis filter with this 3-in-1 replacement cartridge, designed for consistent purification and consistently high water quality. Thanks to its integrated design combining PP filtration, activated carbon and the RO membrane, this cartridge reduces sediment, chlorine and dissolved impurities, delivering clean water with a pleasant taste and odor day after day. The quick twist-lock installation, requiring no tools, makes replacement a simple and effortless operation.

Key Benefits

• 3-in-1 filtration – PP, activated carbon and RO membrane in a single cartridge
• Reduces sediment, chlorine and dissolved impurities
• Eliminates unwanted taste and odor from water
• Clean, great-tasting water for everyday use
• Twist-lock installation, no tools required – quick and easy replacement
• Service life of up to 12 months or 2,000 L
• Built-in indicator that reminds you when it is time for replacement

Technical Specifications

• Compatibility: CROSS RAY countertop reverse osmosis filter
• Filter type: 3-in-1 cartridge (PP + CB + RO)
• Replacement interval: 12 months
• Filter capacity: 2,000 L
• RO membrane: 75 GPD
• Installation: twist-lock, no tools required
• Product code (SKU): CSV175BHAECO
• Brand: Ecosoft

Water Usage Conditions

• Water source: cold municipal tap water
• Inlet water temperature: 5–38 °C
• Recommended inlet TDS: up to 500 ppm

Smart Maintenance

The built-in indicator alerts you when it is time to replace the filter, helping to maintain stable purification performance. The actual filter service life may vary depending on water quality and usage conditions.

Filter Replacement Procedure

• Open the tank lid and remove the raw water tank.
• Remove the used cartridge and securely install the new cartridge.
• Fill the tank with tap water.
• Reinstall the tank and close the lid firmly.

Caution! If this lid is not closed properly, the device will not start.

• Connect the power cable to the electrical outlet. The device automatically enters water production mode in approximately 10 minutes.
• Discard the first batch of water, as it may be cloudy, and refill the tank with tap water.
• Start the rinse cycle after replacing the cartridge – the process takes approximately 20 minutes and cleans the filters and pipes. Follow the device instructions and change the water when prompted.

Caution! Do not use drinking water during the filter rinse cycle.

• After the rinse cycle is complete, produce approximately 1 L of water at room temperature, then 1 L of water at 100 °C.
• Make sure the system is operating stably.
• Press and hold the Filter Reset button for 5 seconds.

Daily Use

• Before filtering again, always empty any water remaining in the tank from the previous filtration cycle.
• Do not drink water that has been left unused for more than 48 hours.
• Clean the water tank and drip tray regularly.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.