FILTRO Infinity DF600

Discover pure water, straight from the tap, with the FILTRO INFINITY DF600 – a compact, smart and highly efficient reverse osmosis system. With a tap flow rate of up to approximately 1.8 L/min (depending on temperature and water composition), and with no storage tank, this purifier gives you instant access to freshly filtered water, removing up to 99.8 per cent of contaminants (details). The reverse osmosis membrane ensures a very high reduction in TDS and numerous dissolved contaminants, depending on the type of contaminant and the conditions of the feed water. Rejection rates vary depending on the substance and the composition of the water. Equipped with a booster pump, a TDS display and twist-lock cartridges for quick replacement, the FILTRO INFINITY DF600 is the ideal solution for families who want high-quality water, effortlessly and without compromise.

Key benefits

• 600 GPD membrane, Direct Flow system without a storage tank, with a tap flow rate of up to approximately 1.8 L/min.
• Removes up to 99.8% of contaminants through advanced filtration with a separation rating equivalent to approximately 0.0001 µm
• Integrated display with real-time TDS monitoring for filtered water.
• Visual and audible indicator for replacing consumables – you always know when it’s time to change them.
• Twist-lock cartridges for quick replacement without the need for a plumber.
• Booster pump included, for a constant and stable flow.
• Excellent 4:1 ratio (purified water : waste water), which maximises purification efficiency and reduces water wastage.
• Easy installation in under 30 minutes, with the unit delivered fully assembled.
• Compact design, suitable for small spaces under the sink.

Superior filtration performance

Installed under the sink, the system uses 2 cartridges and 3 advanced filtration stages to provide you with clean, safe water. The 0.0001-micron reverse osmosis membrane ensures fine filtration, effectively removing impurities and contaminants from tap water, with a filtration efficiency of up to 99.8 per cent, varying depending on the substances and composition.

• Stage 1: 5-micron polypropylene cartridge.
• Stage 2: Activated carbon cartridge for the removal of chlorine and its derivatives.
• Stage 3: 600 GPD reverse osmosis membrane.

Smart display and TDS monitoring

The front panel displays the TDS value of the filtered water in real time, as well as the remaining lifespan of each cartridge. The built-in TDS sensor constantly monitors water quality, whilst the visual and audible indicators alert you when it’s time to replace the filters. This means you’re always kept informed about the quality of the filtration.

Simple installation and quick replacement

The system is delivered fully assembled, and installation simply involves connecting it to the water supply and fitting the tap. Installation is straightforward, and the whole process takes less than 30 minutes. The twist-fit cartridges can be replaced quickly with a simple twist, without the need for a plumber.

Optional remineralisation

The FILTRO INFINITY DF600 system does not include a remineralisation cartridge, but this can be added as an extra. If you would like mineralised water, we recommend installing the additional FILTRO ALK3 cartridge, which will alkalise and mineralise the purified water.

Technical specifications

• Product name: FILTRO Infinity DF600
• Brand: FILTRO
• Product code (SKU): INFINITY-DF600
• EAN: 6426887013317
• MPN: DF600
• Product type: Water purifier
• Filtration method: Reverse osmosis
• Filtration stages: 3 stages
• Filtration rating: equivalent to approximately 0.0001 µm
• Membrane capacity: 600 GPD
• Filtration capacity: 600 GPD
• Filtered water flow rate: 1.8 litres/min
• Filtration efficiency: Up to 99.8%
• Storage tank: No tank (direct flow)
• Booster pump: Yes, included in the system
• Integrated display: Yes, with TDS display
• TDS monitoring: Yes, for filtered water
• Consumables replacement indicator: Yes, visual and audible indicator
• TDS range: 0–500 TDS
• Remineralisation: No, but can be added as an optional extra
• Flow rate: 4:1
• Estimated membrane capacity: up to 30,000 L
• Estimated system service life: up to 10 years, with proper maintenance
• Colour: White and Black
• Material: BPA-free plastic
• Use: Cold water
• Intended for: Worktop tap

Installation and supply requirements

• Installation location: Sink surround
• Electrical socket: 220V socket
• Electrical connection: 220–240 V @ 50–60 Hz
• Hole in worktop/sink: Requires a hole
• Tap hole diameter: 12 mm
• Installation time: under 30 mins
• Installation difficulty: Low (under 30 mins)
• Water supply type: Mains water
• Operating pressure: 1.5–5 bar
• Temperature: 4–38 °C

Water supply parameters

• pH: 6.5–8.5
• Water hardness: below 30 dH
• Chlorine: less than 0.5 ppm
• Manganese: less than 0.1 ppm
• Total iron: less than 0.3 ppm
• TMC (Total Microbial Count): less than 50 CFU/100 ml

System dimensions

The system is compact in size: 40 cm long, 40 cm high and 15 cm wide, taking up very little space under the sink.

Package contents

• FILTRO INFINITY DF600 water purification system
• 2-in-1 pre-filter cartridge, installed in the system
• 600 GPD reverse osmosis membrane, fitted to the system
• Satin-finish stainless steel tap
• 220V power supply for the system
• 1/2" supply T-piece with tap for 3/8" hose
• Fitting connectors
• Connection hoses (3/8" inlet and 1/4" outlet)
• Clamp for the drain pipe
• Quick-connect coupling wrench
• Spare parts: clamps for quick-connect couplings, seals, fuses
• Hose cutter blade

Microbiological safety and conditions of use

Reverse osmosis filtration systems are designed to improve the quality of drinking water and reduce impurities; however, they are not sterilisation equipment and do not guarantee the complete elimination of microbiological contamination under all conditions of use.

The quality of the filtered water depends on factors such as the quality of the feed water, correct installation, initial and regular sanitisation, and adherence to the replacement intervals for consumables.

In the absence of proper installation and maintenance, bacteriological contamination may occur within the system or at the point of use. For applications involving microbiological risk, the use of a UV steriliser is recommended. The results of the analyses may be influenced by the method of sampling, handling and transport of the water sample.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.