Categories
  • FILTRO Family
    FILTRO Family

    FILTRO Family


    Industrial reverse osmosis, Ecosoft MO10000TP5, economical, controller, 2 x 40" membrane housings, pre-filtration and pump included

    Commercial/industrial reverse osmosis station with 2 x 40" membrane housings. The station is equipped with a controller and a 5-micron sediment pre-filter.
    Read more

    Free delivery
    Message on WhatsApp
    Online installments from 0 lei / month
    Installments
    Preorder

    Delayed Shipping after stock replenishment (contact us).

    Similar variants

    Guaranteed by FILTRO.ro

    SKU: RO10000TP5 | ID: 1782 | Brand: Ecosoft | Categories: Reverse Osmosis, Industrial reverse osmosis

    Description

    Industrial reverse osmosis station, Ecosoft MO1000TP5 is a compact, lightweight and efficient system that will help you filter up to 250 litres of water per hour (6500 litres per day). It contains two 40" membrane housings. The membrane is not included and must be purchased separately. Good membrane efficiency is also provided by the integrated pressure pump, which maintains optimal pressure in the system. This system is fully automated. The station is compact, easy to transport and quiet.

    Ecosoft MO10000TP5 is designed to provide purified water in large homes, cafes, restaurants, laboratories, laundries, steam generators and other industries where you need pure water in a volume of approx. 500 litres / hour.

    Main advantages of this station:

    • up to 10000 litres of purified water per day
    • perfect for small spaces
    • made using excellent quality components
    • ready assembled and easy to install and use
    • saves up to 50% energy thanks to the included pump
    • includes a high-pressure pump
    • has 2 x 40" reverse osmosis membrane housings

    During the filtration process, water is split into 2: purified and concentrated. Part of the concentrated water is discharged to the drain (wastewater), but another part is pushed towards the high-pressure pump. In this way, water that would normally be lost is passed through the filtration process once more. If the inlet water has a high calcium and magnesium content, softening is recommended before it reaches the osmosis membrane. This protects the membrane against limescale deposits.

    The purified water is then transferred to a tank (not included) in which a float switch is installed. When the tank is full, the switch sends a signal to the osmosis station and it stops filtering. The station self-rinses at regular intervals. This procedure is called hydraulic flushing and lasts approx. 1-2 minutes, during which the station will be in service mode.

    Equipment*:

    • Grundfos® CM 1-10 pump
    • 300 psi membrane housing
    • 2.5 × 10″ sediment pre-filter
    • Electrical panel with Ecosoft controller
    • Pipes, instrumentation
    • Steel frame
    • Wooden crate

    * The conductivity sensor is not included in the system components.

    Optional membranes:

    • Ecosoft ELP-4040
    • Filmtec™ ХLE-4040
    • Filmtec™ LCLE-4040

    Connections:

    • feed water - ½"
    • permeate - ½"
    • concentrate - ½"

    Technical specifications:

    • Permeate capacity** - 500 L/h
    • Permeate recovery*** - 75%
    • Maximum TDS - 3000 mg/L
    • Required feed water pressure drop - 320…400 L/h (service)
    • Operating pressure - 8…12 bar
    • Maximum pressure - 14 bar
    • Electrical requirements - 230 V, 50 Hz (1 phase)
    • Electrical power - 0.7 kW
    • Pre-filter filtration rating - 5 μm

    ** depends on feed water TDS, temperature and permeate recovery
    *** for low-hardness water

    Feed water requirements:

    • Feed water temperature - +5...+40 °С
    • Residual chlorine, maximum - 0.1 mg/L
    • Hardness - up to 3 meq/L (150 mg/L CaCO₃)
    • Iron - up to 0.1 mg/L
    • Manganese - up to 0.05 mg/L
    • Silicates - up to 20 mg/L
    • Chemical oxygen demand, maximum - 4.0 mg О₂/L
    • Hydrogen sulfide - none

    INFO: Limits may be exceeded if antiscalant, oxygen removal agent or other chemical pre-treatment for reverse osmosis is used.

    The OC5000 controller is designed for automatic or manual control of the reverse osmosis unit and provides automatic start and stop of the equipment on signal, emergency shutdown of the equipment via signals from dry-run sensors, overpressure in the module, and equipment shutdown on external STOP signal.

    Applications for this reverse osmosis station include: steam boilers, heating and cooling circuits, breweries and beverage production, livestock and poultry farms, glaze factories, laundries and car washes.

     

    FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.

    Specifications

    General characteristics

    Warranty 24 months

    Reviews (0)

    0.00 (0 reviews)


    • 5 stars
      0%
      0 reviews
    • 4 stars
      0%
      0 reviews
    • 3 stars
      0%
      0 reviews
    • 2 stars
      0%
      0 reviews
    • 1 star  
      0%
      0 reviews

    Bought together

    Other customers who bought the product above have also added these products to their basket.

      Your browsing history

      Roata REDUCERILOR!

      Încearcă-ți norocul și poți câștiga reduceri (până la 50%) sau premii în produse.

      * Prin abonare ești de acord cu termenii site-ului și politica de confidențialitate.