Categories
  • FILTRO Family
    FILTRO Family

    FILTRO Family


    Industrial reverse osmosis, Ecosoft MO5000TP5, economical, OC5000 controller, 1 x 40" membrane housing, prefiltration and pump included

    Commercial/industrial reverse osmosis station with a 40" membrane housing, capable of filtering up to 250 litres of water per hour. The station is equipped with a controller and a 5-micron sediment pre-filter.
    Read more

    Free delivery
    Online installments from 0 lei / month
    Installments
    Out of stock

    Shipping unavailable. Contact us for more details.

    Similar variants

    Guaranteed by FILTRO.ro

    Replacements

    SKU: RO5000TP5 | ID: 1373 | Brand: Ecosoft | Categories: Reverse Osmosis, Industrial reverse osmosis

    Description

    Industrial reverse osmosis station, Ecosoft MO5000TP5 is a compact, lightweight and efficient system that will help you filter up to 250 litres of water per hour (6,500 litres per day). It contains one 40" membrane housing. The membrane is not included and must be purchased separately. Good membrane efficiency is also provided by the integrated pressure pump, which maintains optimal pressure in the system. This system is fully automated. The station is compact, easy to transport and silent.

    Ecosoft MO5000TP5 is designed to provide purified water in large homes, cafés, restaurants, laboratories, laundries, steam generators and other industries where you need pure water at a volume of approx. 250 litres / hour.

    Main advantages of this station:

    • up to 6,500 litres of purified water per day
    • perfect for limited spaces
    • manufactured using excellent quality components
    • ready assembled and easy to install and use
    • saves up to 50% energy thanks to the included pump
    • includes a high-pressure pump
    • has 1 x 40" reverse osmosis membrane housing

    During the filtration process, the water is split into 2 streams: purified and concentrated. Part of the concentrated water is discharged to the drain (wastewater), but another part is pushed back towards the high-pressure pump. In this way, water that would normally be lost is passed through the filtration process once more. If the feed water has a high calcium and magnesium content, it is recommended to soften it before it reaches the osmosis membrane. This protects the membrane against scale deposits.

    The purified water is then transferred to a tank (not included) in which a float switch is installed. When the tank is full, the switch sends a signal to the osmosis station and it stops filtration. The station self-rinses at regular intervals. This procedure is called hydraulic flushing and lasts approx. 1–2 minutes, during which the station will be in service mode.

    Equipment*:

    • Grundfos® CM 1-10 pump
    • 300 psi membrane housing
    • 2.5 × 10″ sediment pre-filter
    • Electrical panel with Ecosoft controller
    • Pipes, instrumentation
    • Steel frame
    • Wooden crate

    * The conductivity sensor is not included in the system components.

    Optional membranes:

    • Ecosoft ELP-4040
    • Filmtec™ ХLE-4040
    • Filmtec™ LCLE-4040

    Connections:

    • feed water - ½"
    • permeate - ½"
    • concentrate - ½"

    Technical specifications:

    • Permeate capacity** - 250 L/h
    • Permeate recovery*** - 75%
    • Maximum TDS - 3000 mg/L
    • Required feed water pressure drop - 320…400 L/h (service)
    • Operating pressure - 8…12 bar
    • Maximum pressure - 14 bar
    • Electrical requirements - 230 V, 50 Hz (1 phase)
    • Electrical power - 0.7 kW
    • Pre-filter filtration rating - 5 μm

    ** depends on feed water TDS, temperature and permeate recovery
    *** for low-hardness water

    Feed water requirements:

    • Feed water temperature - +5...+40 °С
    • Residual chlorine, maximum - 0.1 mg/L
    • Hardness - up to 3 meq/L (150 mg/L CaCO₃)
    • Iron - up to 0.1 mg/L
    • Manganese - up to 0.05 mg/L
    • Silicates - up to 20 mg/L
    • Chemical oxygen demand, maximum - 4.0 mg О₂/L
    • Hydrogen sulphide - none

    INFO: Limits may be exceeded if antiscalant, oxygen scavenger or other chemical pre-treatment for reverse osmosis is used.

    The OC5000 controller is designed for automatic or manual control of the reverse osmosis unit and provides automatic start and stop of the equipment on signal, emergency shutdown of the equipment via signals from dry-run sensors, overpressure in the module, and shutdown of the equipment on an external STOP signal.

    Applications for which this reverse osmosis station can be used include: steam boilers, heating and cooling circuits, breweries and beverage production, livestock and poultry farms, glaze factories, laundries and car washes.

     

    FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.

    Specifications

    General characteristics

    Package weight 85 kg
    Warranty 24 months

    Reviews (0)

    0.00 (0 reviews)


    • 5 stars
      0%
      0 reviews
    • 4 stars
      0%
      0 reviews
    • 3 stars
      0%
      0 reviews
    • 2 stars
      0%
      0 reviews
    • 1 star  
      0%
      0 reviews

    Bought together

    Other customers who bought the product above have also added these products to their basket.