Standard reverse osmosis system, Ecosoft Standard MO550MP, pressure pump, 50 GPD, 5-stage system with remineralisation

Reverse osmosis water filtration system for pure water delivered straight to your kitchen. This system comprises five stages of filtration and includes a high-power pressure pump. The filtered water storage tank has a total volume of 12 litres and a maximum usable volume of 7 litres; it is BPA-free and is included in the package.

This type of reverse osmosis filter is designed for both domestic use and for medical practices, chemical laboratories, restaurants or offices. It is made from very high-quality materials and all components have been tested by NSF and WRAS.

Reverse osmosis water treatment is based on a physical process, namely the filtration of water through a semi-permeable membrane, which does not involve any chemical treatment. The water produced by reverse osmosis is pure and free from bacteria and viruses. This system will provide purified water for the whole family. The following contaminants are completely removed from the water: chlorine, chlorides, phosphates, nitrates, sulphates, sodium, potassium, ammonium, etc. 

This filter is also fitted with a pump to increase the pressure.

Technical specifications:

Filter 1: a 5-micron polypropylene (PP) cartridge that removes large sediments such as sand, soil and rust, as well as other impurities that often occur due to deposits in old water systems. It should be replaced every 6–9 months.

Filter 2: a granular activated carbon (GAC) cartridge that removes chlorine and other chemical compounds harmful to the body. It should be replaced every 6–9 months.

Filter 3: 1-micron polypropylene (PP) cartridge for filtering out sediment larger than 1 micron. Replace every 6–9 months.

Filter 4: Reverse osmosis membrane with a filtration fineness of 0.0001 microns. It has a filtration capacity of 12 litres of water per hour. Replace every 12–24 months.

Filter 5: Mineralisation post-filter (MIN) to improve the taste of the water. Replace every 6–9 months.

You can upgrade the system by adding the following:

1. Post-carbon – A post-filter made from activated coconut shell carbon.

2. UV steriliser – This is fitted after the last cartridge in the system and secured with special clamps.

Microbiological safety and conditions of use

• Reverse osmosis filtration systems are designed to improve the quality of drinking water and reduce impurities; however, they are not sterilisation devices and do not guarantee the complete elimination of microbiological contamination under all conditions of use.
• The quality of the filtered water depends on factors such as the quality of the feed water, correct installation, initial and periodic sanitisation, and adherence to the replacement intervals for consumables.
• In the absence of proper installation and maintenance, bacteriological contamination may occur within the system or at the point of use. For applications involving microbiological risk, the use of a UV steriliser is recommended.
• Test results may be affected by how the water sample is collected, handled and transported.

The pack contains:

• Set of 4 cartridges (3 pre-filtration and 1 post-filtration)
• 0.0001-micron osmotic membrane, capacity 50 GPD (190 litres/day)
• Electric pressure pump, pre-installed in the system.
• High and low-pressure sensors
• 12-litre storage tank, BPA-free, maximum usable volume of 8 litres.
• Wall-mounted bracket.
• Classic chrome-plated tap, single-lever.
• ½” connector for connecting to the water supply.
• Spanner for securing the casings.
• Teflon tape for sealing.
• ¼” water pipes in various colours.
• Cartridge housing.
• Check valve.
• Differential valve.
• Drain restrictor.
• Installation instructions.

System and tank dimensions:

– The filter housing is 43 cm wide, 49 cm high and 21 cm deep (43 cm × 49 cm × 21 cm).
– The storage tank is 40 cm high and 26 cm in diameter (40 cm × 26 cm)

Replacing the filter cartridges:

• The pre-filter cartridges (the first 3) should be replaced every 6–9 months
• The post-filtration cartridge (the last one) should be replaced every 9–12 months
• The reverse osmosis membrane should be replaced approximately every 18–24 months.

* The service life of the cartridges varies depending on the quality of the inlet water and the amount of water consumed.

Original replacement cartridges:

- Set of 3 pre-filtration cartridges – cartridges 1, 2 and 3, to be replaced every 6–9 months. Other compatible versions of pre-filtration cartridges are also available.

- Reverse osmosis membrane, FILTRO TFC 50G, 0.0001 microns, 50 GPD (189 litres/day) – cartridge no. 4, to be replaced every 18–24 months. Higher-capacity versions are also available: 75 GPD or 100 GPD.

- Remineralisation filter with 1/4″ quick-connect fittings – Cartridge no. 5 should be replaced every 9–12 months.

- OPTIONAL: Granular activated carbon filter with 1/4” quick-connect fittings – Cartridge no. 6 is fitted on top of no. 5 using 2”x2” clamps

The system comes complete with a 1/2" connection fitting, a supply tap and all the accessories required for installation. If you require a different connection fitting (3/8" or 3/4"), please specify this in the order notes.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.