Reverse osmosis, FILTRO Standard 6MP, booster pump, remineralisation, stand and tank

Reverse osmosis water filtration system for pure water delivered straight to your kitchen. This system comprises six stages of filtration and also includes a high-power pressure pump. The system is also fitted with a cartridge for remineralising the filtered water. The filtered water storage tank has a capacity of 12 litres, is BPA-free and is included in the package.

This type of reverse osmosis filter is designed for both domestic use and for medical clinics, chemical laboratories, restaurants or offices. It is made from very high-quality materials and all components have been tested by NSF and WRAS.

Reverse osmosis water treatment is based on a physical process, namely the filtration of water through a semi-permeable membrane, which does not involve any chemical treatment. The water produced by reverse osmosis is pure and free from bacteria or viruses. This system will provide purified water for the whole family. It removes or reduces the following contaminants from the water: chlorine, chlorides, phosphates, nitrates, sulphates, sodium, potassium, ammonium, etc.

This filter is also fitted with a pump to increase the pressure.

Technical specifications:

Filter 1: a 5-micron polypropylene (PP) cartridge that removes large sediments such as sand, soil and rust, as well as other impurities that often occur due to deposits in old water systems. It should be replaced every 3–6 months.

Filter 2: a granular activated carbon (GAC) cartridge which removes chlorine and other chemical compounds harmful to the body. It should be replaced every 6–9 months.

Filter 3: 1-micron polypropylene (PP) cartridge for filtering out particles larger than 1 micron. It should be replaced every 6–9 months.

Filter 4: Reverse osmosis membrane with a filtration precision of 0.0001 microns. It has a capacity to filter 12 litres of water per hour. Replace every 24 months.

Filter 5: Block activated carbon post-filter (CTO) to improve the taste of the water. Replace every 9–12 months.

Filter 6: Remineralisation filter, which adds minerals beneficial to the human body to the freshly filtered water. It is replaced every 12 months.

Microbiological safety and conditions of use

• Reverse osmosis filtration systems are designed to improve the quality of drinking water and reduce impurities; however, they are not sterilisation equipment and do not guarantee the complete elimination of microbiological contamination under all conditions of use.
• The quality of the filtered water depends on factors such as the quality of the feed water, correct installation, initial and periodic sanitisation, and adherence to the replacement intervals for consumables.
• In the absence of proper installation and maintenance, bacterial contamination may occur within the system or at the point of use. For applications involving a microbiological risk, the use of a UV steriliser is recommended.
• Test results may be affected by how the water sample is collected, handled and transported.

The pack contains:

• Set of 5 cartridges (3 pre-filtration and 2 post-filtration)
• 0.0001-micron osmotic membrane, capacity 50 GPD (190 litres/day)
• Electric pressure pump, pre-installed in the system.
• High and low pressure sensors
• 12-litre storage tank, BPA-free, maximum usable volume of 8 litres.
• Sturdy metal stand with rubber feet and wall mounting.
• Elegant chrome-plated single-lever tap.
• ½” connector for connection to the water supply.
• Wrench for securing the casings.
• Teflon tape for sealing.
• ¼” water pipes in various colours.
• Cartridge housing.
• Check valve.
• Differential valve.
• Drain restrictor.
• Installation instructions

System and tank dimensions:

– The filter housing is 43 cm wide, 49 cm high and 21 cm deep (43 cm × 49 cm × 21 cm).

– The storage tank is 40 cm high and 26 cm in diameter (40 cm × 26 cm)

The system comes complete with a 1/2" connection fitting, a supply tap and all the accessories required for installation. If you require a different connection fitting (3/8" or 3/4"), please specify this in the comments section of your order.

The pre-filter and post-filter cartridges should be replaced approximately every 9 months. The reverse osmosis membrane should be replaced every 2–3 years.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.