Set 4 filtre pentru FILTRO MF5 ALCALIN

Set of 4 inline cartridges compatible with most filtration systems or water dispensers with 2.5" brackets (clips). The cartridge housings measure 12" in length and 2.5" in diameter, while cartridge no. 5 has a length of 10.8" and a diameter of 2". All filters require a quick-connect fitting with a 1/4" thread (straight or elbow). Normally, the existing connectors in the filtration system are reused, but it is necessary to replace the teflon tape on each thread.

Filter elements included in the set, their role and service life:

1. Inline sediment filter, 1 micron, which is very easy to install and replace. The filter has a 1/4″ internal thread at both ends. It has a size of 12″ x 2.5″ (30 x 6.5 cm). It has been designed to ensure an optimal flow rate for sediment filtration. The nominal filtration rating is 1 micron. Maximum replacement interval 6 months or 3000 liters of water (AIPRO-1M-AQ / AIPRO-20M-AQ*).

2. Inline water softening filter which is very easy to install and replace. The filter has a 1/4" internal thread at both ends. It has a size of 12″ x 2.5″ (30 x 6.5 cm). The filter is equipped with a pre and post filter to prevent media particles from being released into the water. It has been designed to ensure optimal contact between the water and the softening resin. At the same time, maximum performance for negative ion exchange has been pursued. Maximum replacement interval 6 months or 3000 liters of water (AISTRO-L-AQ).

3. Inline activated carbon filter. In the first stage, chlorine, chlorine derivatives and organic contaminants are removed, while in the second stage the taste of the water is improved by eliminating substances that give the water an unpleasant taste and odor. It has a size of 12″ x 2.5″ (30 x 6.5 cm). Maximum replacement interval 6 months or 3000 liters of water (AICRO-L-AQ / FCCBL-S-L-AQ*).

4. - Special alkalizing and remineralizing water filter - (not included in this set)

5. Coconut shell activated carbon filter and antibacterial filter that improves the taste and odor of water and prevents bacterial growth. It is an in-line filter that removes chlorine, organic substances and pesticides. It improves the taste and aroma of filtered water. It has a size of 10″ x 2″ (25 x 5 cm). Maximum replacement interval 6 months or 3000 liters of water (AICRO-AB).

* Replacement and similar alternative if the original cartridge is out of stock.

Complete maintenance cycle:
1. Filters from the intermediate set (no. 1, 2, 3) and post-filtration (no. 5), included in the set: normally replaced once every 6 months**.
2. The alkalizing and remineralizing cartridge (no. 4), not included in the set: replaced on average once every 12 months* (see variants AIFIR-200, AIFIR-2000, Balance, Alkafuse)
** depending on the quality of the inlet water.

This set contains:
✔ the intermediate set of 4 cartridges for month 6.

The requirement for 1 full year (12 months) is 2 sets of cartridges: 1 intermediate set (installed in month 6) and 1 complete set (installed in month 12). After that, the month counter is reset.

The service life of these cartridges varies depending on the quality of the inlet water; however, the replacement recommendation is specified for each individual element. This set of 4 cartridges represents the set that is replaced on average every 6 months. The set of 4 cartridges is delivered in a box of 4 or as individual elements (cartridges). All cartridges are individually sealed and it is necessary to check the integrity immediately upon receipt.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.