FILTRO Glaciar Soda

The FILTRO Glaciar Soda water dispenser adds a touch of style to any kitchen or company premises. The dispenser features a built-in reverse osmosis purification system comprising four high-performance cartridges with a quick-connect twist system. The cartridges are connected at the bottom of the dispenser, in a dedicated compartment. Replacing the cartridges is very easy thanks to the quick-connect system.

This dispenser is already fitted with a filtration system comprising four cartridges: PP, CTO, RO, T33 and UV. It dispenses cold water (~4 degrees Celsius) and hot water (up to 90 degrees Celsius).

The storage tanks (for hot and cold water) are made of stainless steel. The heating element in the hot water tank is external, making it very easy to replace should this be necessary. The dispenser is fitted with a hot water safety cut-out.

Main advantages of the dispenser:

• Cold and hot water supplied directly from the mains.
• 4-stage ultrafiltration system plus a UV steriliser in the tank.
• Indicator lights for hot and cold water
• Stainless steel tanks for cold and hot water.
• Quick cartridge replacement, without the need for a plumber.

Integrated filtration system

A 5-stage reverse osmosis system is installed in the lower compartment of the FILTRO Glaciar Soda water dispenser, whilst the cold water tank contains a UV steriliser to eliminate and prevent bacteria. This filtration system provides you with safe, great-tasting water that is free from impurities, chemical contaminants and even bacteria. Filtration takes place via a 0.0001-micron reverse osmosis membrane, which is effectively the best method of filtration without waste water.

The reverse osmosis system consists of 4 cartridges with a twist-lock system. Cartridge replacement is very quick, requires no specialist staff and causes no water splashing.

1. A polypropylene pre-filter, which filters out sediments larger than 1 micron, such as rust, sand, soil, etc. Replacement required approximately every 6 months.
2. Activated coconut shell carbon filter cartridge with two stages of filtration. In the first stage, it removes chlorine, chlorine derivatives and organic contaminants. In the second stage, it improves the taste of the water by removing substances that give the water an unpleasant taste and odour. Replace approximately every 6 months.
3. 0.0001-micron reverse osmosis membrane. Replace after approx. 6–12 months.
4. Activated carbon filter cartridge made from coconut shells, which improves the taste of the water and removes heavy metals such as mercury, arsenic and lead. Replace after approx. 6 months.
5. UV steriliser located in the cold water tank. This steriliser removes bacteria from the water and prevents them from multiplying. The UV lamp bulb should be replaced every 12 months.
6. CO₂ cylinder for carbonated water

Technical specifications:

• Weight: 22.60 / 25.6 kg
• 4-temperature settings: cold / hot / room temperature / sparkling
• Cold water tank capacity: 3 litres
• Hot water tank capacity: 1.8 litres
• Room-temperature water tank capacity: 5 litres
• Dimensions: 47 x 39 x 139 (cm)
• Power: 620 W
• Compressor: 1/10 HP
• Protection: Bimetal thermostat.
• Cooling capacity: 5.1 litres / hour
• Heating capacity: 7.9 litres per hour
• Certifications: CE, BE, SASO, RoHS
• Power supply: AC 220V – 240V / 50Hz

Info: The dispenser will be supplied with an installation kit comprising a flexible hose and a water mains connection system (1/2"). In practice, the dispenser can be installed directly onto the water supply. Depending on the distance at which you wish to install the system, please purchase an additional flexible hose.

Installation and commissioning:

Warning! After transport, the dosing unit must be left in an upright position for at least 12 hours before connecting it and switching on the cold water pump. The equipment must be installed by qualified personnel, and it is essential to read the user manual in full and to download and complete the warranty certificate available in your customer account. The qualified person or company commissioning the unit must check the installation and enter the measured supply water values on the certificate. This equipment contains consumables. If these have been unsealed or the system has been filled with water, a return is no longer possible.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.