FILTRO INFINITY+ DF1000-ALK3

The FILTRO INFINITY+ DF1000-ALK3 is a compact reverse osmosis water purifier that provides a direct flow of freshly filtered water at a rate of approximately 2.6 litres per minute, without the need for a storage tank. The purifier is fitted with a high-pressure pump, a 1000GPD reverse osmosis membrane and a TWIST cartridge system for quick replacement without the need for a plumber. It also comes complete with the FILTRO ALK3 mineralisation alkalisation system. This raises the pH of the purified water and improves its taste significantly.

This advanced filtration system has a built-in controller that measures water quality (TDS) in real time and displays it on the integrated screen. This means you are constantly informed about the filtration quality and whether it is time to replace the cartridges. The system also alerts you if it has been too long since the last replacement of consumables.

Superior filtration performance: the under-sink reverse osmosis system uses a 2-in-1 cartridge made of polypropylene and activated carbon block for optimal pre-filtration, as well as a 0.0001-micron reverse osmosis membrane with a filtration capacity of 1,000 GPD. Through these three advanced stages of filtration, the system removes 99.8 per cent of over 1,000 contaminants from the water, including lead, chlorides, fluorides, heavy metals, chloramine, volatile compounds, dissolved solids, limescale, arsenic and others. 

1.5:1 filtered water to waste water ratio: thanks to advanced wastewater recovery technology, the 1000 GPD reverse osmosis membrane maximises purification efficiency and recovers up to 450 per cent more water compared to a conventional reverse osmosis system. In practice, discharge into the mains is controlled by the internal computer, and flushing takes place automatically after 10 litres of water have been consumed, or at a set time interval. The system is specially designed for use without a storage tank. It is compact and takes up little space, making it ideal for homes with limited space under the sink. You’ll no longer need to store plastic water bottles and will have a high-performance, environmentally friendly appliance.

Excellent water flow: the FILTRO INFINITY+ DF1000 system ensures rapid access to filtered water via the satin-finished stainless steel tap. The high-pressure pump fitted to the system delivers up to 3,780 litres of filtered water per day, enough for a large family or even for business premises. The water flow is fast and steady, filling a 330 ml glass in just 5 seconds. Enjoy a glass of cold water in no time!

Smart display: the front panel shows the TDS value of the filtered water output in real time, as well as the remaining lifespan of each individual cartridge. The system has a built-in TDS sensor that constantly monitors water quality and displays the reading on the front panel. In addition, the built-in controller acts as a reminder, displaying different colours to indicate when the cartridges need replacing. This way, you’ll know in advance if you need to buy new replacement cartridges. Cartridge replacement is quick and can be done without a plumber in just 30 seconds.

Easy installation and quick replacement: the instructions included in the pack will show you, step by step, just how easy it is to install this purification system in just a few minutes. The system comes fully assembled and installation simply involves connecting it to the water supply and fitting the tap. The filter cartridges feature a very clever TWIST mechanism and can be replaced quickly with just a twist.

Microbiological safety and conditions of use

• Reverse osmosis filtration systems are designed to improve the quality of drinking water and reduce impurities; however, they are not sterilisation equipment and do not guarantee the complete elimination of microbiological contamination under all conditions of use.
• The quality of the filtered water depends on factors such as the quality of the feed water, correct installation, initial and periodic sanitisation, and adherence to the replacement intervals for consumables.
• In the absence of proper installation and maintenance, bacteriological contamination may occur within the system or at the point of use. For applications involving microbiological risk, the use of a UV steriliser is recommended.
• Test results may be affected by how the water sample is collected, handled and transported.

Package contents:

• FILTRO INFINITY+ DF1000 water purification system
• FILTRO ALK3 alkalisation system
• 2-in-1 pre-filtration cartridge, installed in the system
• 1000GPD reverse osmosis membrane, installed in the system
• Black tap
• The system’s 220V power supply
• 1/2″ supply T-piece with tap for 3/8″ hose
• Fitting connectors
• Connection hoses (3/8″ inlet and 1/4″ outlet)
• Clamp for the exhaust pipe
• Wrench for quick-connect couplings
• Spare parts: clamps for quick-connect fittings, seals, fuses.
• Hose cutter

The FILTRO ALK3 alkalisation cartridge is installed downstream of the FILTRO INFINITY+ DF1000 purification system.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.