Ecosoft Balance

The Ecosoft Balance reverse osmosis system is the latest compact filtration system, designed to provide you with pure water with optimal mineral content, delivered straight to your house or flat. This reverse osmosis water filter is also ideal for filtering water in doctors’ surgeries, restaurants and small bars. It is made from high-quality, durable materials and is ideal for treating cold drinking water.

ADD FLAVOUR AND COMFORT TO YOUR LIFE:

• TECH: Purification through a combination of natural processes and state-of-the-art technology.
• FRESH: A perfect balance of calcium and magnesium minerals for tasty, healthy water.
• ECO: The system is economical and environmentally friendly.
• SAFE: Reverse osmosis filtration technology provides you with safe water, even for children.
• EASY: An easy-to-install purifier for fresh water delivered straight to your home.

Ecosoft Balance combines reverse osmosis membrane purification technology (0.0001 microns) with a 75 GPD capacity, pre- and post-filtration cartridges with dual activated carbon, and a special cartridge for remineralising the filtered water by enriching it with calcium and magnesium. This system differs from all others because it features a highly efficient reverse osmosis membrane. The membrane’s efficiency reaches up to 50 per cent.

The filtered water storage tank provides quick and uninterrupted access to pure water, up to its maximum capacity. The tank is made of food-grade, BPA-free plastic and is highly durable.

This filtration system is compact and stylish, and fits perfectly into small spaces; it can be easily installed either vertically or horizontally.

The filter is also fitted with a modern chrome-plated ceramic tap, which looks great in any kitchen. The filter housings are fitted with seals, thereby eliminating the risk of water leaks.

Installation is very straightforward, requiring no alterations to the plumbing and no plumber. All you need is a spanner and a pipe wrench.

Filtration technology:
1. A 5-micron polypropylene sediment filter that removes turbidity, dirt and debris, including rust, sludge, sand and other undissolved particles larger than 5 microns.
2. A granular activated carbon (GAC) cartridge which effectively removes chlorine and other chlorine derivatives, whilst also improving the taste and odour of the water.
3. A special block activated carbon (CTO) cartridge that pre-filters the water very effectively and removes chlorine and its derivatives. This cartridge contains a special resin that protects the reverse osmosis membrane and also increases its efficiency.
4. A 0.0001-micron reverse osmosis membrane, with a capacity of 280 litres per day, which successfully removes over 99.8 per cent of contaminants, including lead, arsenic, fluorides, nitrates, iron, manganese, copper and other impurities.
5. A calcium and magnesium mineralisation filter which enriches the purified water with minerals essential for the human body, regulates the pH level and improves the taste of the water.
6. A coconut shell carbon filter which removes any residual taste and odour from the water.

Advantages of the system:

• Modern design and high-quality, BPA-free materials.
• Imported directly from Germany.
• Can be installed either horizontally or vertically.
• Reverse osmosis purification to 0.0001 microns thanks to the 75 GPD membrane. The membrane purifies 99.8 per cent of the water.
• Up to 280 litres of fresh water every day.
• Compact system with storage tank and modern ceramic cartridge filter
• Special filter (AquaSpring) for mineralising the purified water to enrich it with calcium and magnesium. Mineralisation is carried out using natural rocks.
• Pure water, free from unpleasant odours and tastes. Ideal for babies.
• Suitable for water from a well or borehole, but also for flats.
• Assembled and tested in the factory. Pressurised system.
• Easy to install, no plumber required. No alterations to the plumbing system are needed.
• All connection parts are included in the pack: T-joint, tap, Teflon tape, mixer tap, etc. All you need is a spanner and a pipe wrench.

Microbiological safety and conditions of use

• Reverse osmosis filtration systems are designed to improve the quality of drinking water and reduce impurities; however, they are not sterilisation equipment and do not guarantee the complete elimination of microbiological contamination under all conditions of use.
• The quality of the filtered water depends on factors such as the quality of the feed water, correct installation, initial and periodic sanitisation, and adherence to the replacement intervals for consumables.
• In the absence of correct installation and maintenance, bacteriological contamination may occur within the system or at the point of use. For applications involving microbiological risk, the use of a UV steriliser is recommended.
• Test results may be affected by how the water sample is collected, handled and transported.

The pack contains:

• A set of 5 cartridges (3 pre-filtration and 2 post-filtration)
• 280-litre (75 GPD) 0.0001-micron osmotic membrane
• 12-litre storage tank, BPA-free, maximum usable volume 8 litres.
• Modern chrome-plated single-lever tap.
• ½” connector.
• ¼” flexible hoses.
• Cartridge housings.
• Check valve.
• Supply tap
• Safety valve
• Differential valve.
• Drain restrictor.
• 2 wrenches for securing the cartridges
• Green system bracket
• Installation instructions included in the pack.

System and tank dimensions:

– The filter housing is 44 cm wide, 31 cm high and 20 cm deep (44x31x20 cm).
– The storage tank is 40 cm high and 26 cm in diameter (40×26 cm)

Replacing the filter cartridges:

• The pre- and post-filtration cartridges (the first 3 and the last 2) should be replaced every 6–9 months
• The reverse osmosis membrane should be replaced approximately every 18–24 months.

* The service life of the cartridges varies depending on the quality of the inlet water and the amount of water consumed.

Installation of the Ecosoft Balance system:

The system comes fully assembled and tested directly from the manufacturer. You will need to fit the cold water inlet, the drain valve and the chrome-plated tap. Normally, the entire installation process takes just a few minutes and can be carried out by someone like you. The efficiency of the osmosis membrane ranges from 20 to 50 per cent, depending on the inlet water pressure. All the information is contained in the system manual. This is clear and easy to follow, contains a detailed diagram and is in Romanian.

The system comes complete with a 1/2″ connection fitting, a supply tap and all the accessories required for installation. If you require a different connection fitting (3/8″ or 3/4″), please specify this in the comments section of your order.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.