Ecosoft Alkafuse

The ECOSOFT ALKAFUSE MO675ALCPURE reverse osmosis filtration system is a premium, compact system designed to provide you with pure water with a pH between 7 and 10, delivered straight to your house or flat. This comprehensive water filtration system can also be used in doctors’ surgeries or in small restaurants and bars. It is made from high-quality, durable materials and is ideal for treating cold drinking water.

ECOSOFT ALKAFUSE combines 75 GPD reverse osmosis membrane purification technology (0.0001 microns) with pre- and post-filtration cartridges containing dual activated carbon, as well as a special cartridge for remineralising the filtered water and raising its pH by enriching it with calcium, magnesium and potassium.

The filtered water storage tank provides you with quick and uninterrupted access to pure water. The tank is made of food-grade, BPA-free plastic and is highly durable. It has a total capacity of 12 litres and a usable capacity of 6.8 litres.

This purification system is compact and, to ensure it fits perfectly into your space, it can be easily installed either vertically or horizontally. The purifier is also fitted with a classic chrome-plated ceramic cartridge, which blends in perfectly with any kitchen. The filter housings are fitted with seals, thereby eliminating the risk of water leaks.

Installation is very straightforward, requiring no alterations to your plumbing and no plumber. All you need is a spanner and a pipe wrench.

Technology and filtration stages:

1. A 5-micron polypropylene sediment filter (PP5) which removes turbidity, dirt and residues, including rust, silt, sand and other undissolved particles larger than 5 microns. It should be replaced approximately every 6–9 months.
2. Block activated carbon (CTO) cartridge, which pre-filters the water very effectively and removes chlorine and its derivatives. It should be replaced approximately every 6–9 months.
3. Granular activated carbon (GAC) cartridge, which effectively removes chlorine and other chlorine derivatives, whilst also improving the taste and smell of the water. Replace after approx. 6–9 months.
4. A 0.0001-micron reverse osmosis membrane with a capacity of 280 litres per day, which successfully removes over 99.8 per cent of contaminants, including lead, arsenic, fluoride, nitrates, iron, manganese, copper and other impurities. Replace every approx. 12–24 months
5. Alkafuse mineralisation and pH-boosting filter, which enriches the purified water with minerals essential for the human body, regulates the pH level and improves the taste of the water. It should be replaced after approx. 6–9 months.
6. Supplementary remineralisation filter which removes any residual taste and odour from the water. Replace after approximately 6–9 months

The main advantages of this purification system:

• Special filter for mineralising purified water, raising the pH to between 7 and 10.
• Modern design and high-quality materials, manufactured in Germany
• Can be installed either horizontally or vertically
• Reverse osmosis purification at 0.0001 microns
• Up to 280 litres of fresh water every day, at optimum pressure.
• Compact system with storage tank and modern ceramic cartridge
• Pure water, free from unpleasant odours and tastes. Ideal for babies.
• Suitable for water from a well or borehole, as well as for flats.
• Assembled and tested in the factory. Pressurised system.
• Easy to install, no plumber required. No need to alter the existing plumbing.
• All connection parts are included in the pack: T-piece, tap, Teflon tape, cartridge, etc. All you need is a spanner and a pipe wrench.

Microbiological safety and conditions of use

• Reverse osmosis filtration systems are designed to improve the quality of drinking water and reduce impurities; however, they are not sterilisation equipment and do not guarantee the complete elimination of microbiological contamination under all conditions of use.
• The quality of the filtered water depends on factors such as the quality of the feed water, correct installation, initial and periodic sanitisation, and adherence to the replacement intervals for consumables.
• In the absence of proper installation and maintenance, bacteriological contamination may occur within the system or at the point of use. For applications involving microbiological risk, the use of a UV steriliser is recommended.
• Test results may be affected by how the water sample is collected, handled and transported.

The ECOSOFT ALKAFUSE MO675ALCPURE water purifier pack contains:

• A set of 5 cartridges (3 pre-filtration and 2 post-filtration)
• A 0.0001-micron osmotic membrane with a capacity of 280 litres
• A 12-litre storage tank, BPA-free, with a maximum usable volume of 8 litres.
• Modern chrome-plated single-lever tap.
• ½” connection fitting.
• ¼” water pipes.
• Cartridge housings.
• Check valve.
• Differential valve.
• Drain restrictor.
• 2 wrenches for securing the cartridges
• System bracket
• Installation instructions.

Installation of the ECOSOFT ALKAFUSE MO675ALCPURE system:

The system comes fully assembled and tested directly from the manufacturer. You will need to fit the cold water inlet, the drain valve and the chrome-plated tap. Normally, the entire installation procedure takes just a few minutes for someone like you to carry out. The efficiency of the osmosis membrane is between 15 and 30 per cent, depending on the inlet water pressure. All the information is contained in the system manual. This is clear and concise, contains a detailed diagram and is in Romanian.

Dimensions of the system and the tank:

– The filter housing is 44 cm wide, 31 cm high and 20 cm deep (44×31×20 cm).
– The storage tank is 40 cm high and 26 cm in diameter (40×26 cm)

Replacing the filter cartridges:

• The pre-filtration cartridges (the first 3) and post-filtration cartridges (the last 2) should be replaced every 6–9 months
• The reverse osmosis membrane is replaced approximately every 12–24 months.

The system comes complete with a 1/2" connection fitting, a supply tap and all the accessories required for installation. If you require a different connection fitting (3/8" or 3/4"), please specify this in the order notes.

• Order methods
• Payment methods
• Delivery of products
• Warranty and service
• Return of products

FILTRO.ro: We make constant efforts to keep the information on this page accurate. Rarely they may contain inaccuracies: the photo is informative and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice or may contain operating errors. All promotions present on the site are valid within the stock limit. In accordance with the provisions of GEO 140/2021, the products benefit from a 24-month legal guarantee of conformity, with the exception of consumables and other products with a special regime.